Foody DaD is a video Center
To keep the structure upright and sturdy (so it does not collapse when filled with cookies), it is recommended to crochet using two strands held together of cotton yarn (such as Gazzal Baby Cotton or Alize Cotton Gold) with a 3.0 mm – 3.5 mm hook, or insert thin plastic canvas/felt between the body walls.Abbreviations (US Terms) MR: Magic Ring sc: Single Crochet inc: Increase (2 sc in the same stitch) dec: Decrease (2 sc together) BLO: Back Loop Only FLO: Front Loop Only sl st: Slip Stitch ch: Chain hdc: Half Double Crochet dc: Double Crochet ( ... ) * 6: Repeat instructions inside parentheses 6 times PART 1: Shared Body Base (Applies to All 4 Models) Note: Make color changes while crocheting the body on the rounds specified under each individual model. 1. Round: 6 sc in MR (6) 2. Round: 6 inc (12) 3. Round: (1 sc, 1 inc) * 6 (18) 4. Round: (2 sc, 1 inc) * 6 (24) 5. Round: (3 sc, 1 inc) * 6 (30) 6. Round: (4 sc, 1 inc) * 6 (36) 7. Round: (5 sc, 1 inc) * 6 (42) 8. Round: (6 sc, 1 inc) * 6 (48) 9. Round: (7 sc, 1 inc) * 6 (54) 10. Round: (8 sc, 1 inc) * 6 (60) 11. Round: (9 sc, 1 inc) * 6 (66) 12. Round: (10 sc, 1 inc) * 6 (72) (Base diameter will be approx. 10–11 cm) 13. Round: BLO 72 sc (72) (Keeps the base flat and turns the wall upward) 14. Round: (11 sc, 1 inc) * 6 (78) 15. Round: (12 sc, 1 inc) * 6 (84) (Gives the body a plump curve) 16–22. Rounds (7 rounds): 84 sc (84) 16. Round: (12 sc, 1 dec) * 6 (78) 17. Round: (11 sc, 1 dec) * 6 (72) 18. Round: 72 sc (72) 19. Round: For a thick, sturdy rim, work BLO 72 sc (72), then crochet 2 more rounds of 72 sc to fold inward and join with a slip stitch to the inner loop of Round 24 to finish the facing (or work 1 round of reverse single crochet / crab stitch after Round 25 and fasten off).
PART 2: Model 1 — Santa Box 1. Body Color Changes (With Belt) Rounds 1–16: Crochet with red yarn. Rounds 17–20 (4 rounds): Crochet with black yarn (Belt section). Rounds 21–26: Crochet with red yarn and fasten off. Belt Buckle (Yellow Yarn): Ch 26 and join with a sl st to form a square. Work 1 round of sc around, making 3 sc in the same stitch at each corner. Sew onto the center of the black band. 2. Santa Hat Lid Start with red yarn: 1. Round: 6 sc in MR (6) 2. Round: 6 sc (6) 3. Round: (1 sc, 1 inc) * 3 (9) 4. Round: 9 sc (9) 5. Round: (2 sc, 1 inc) * 3 (12) 6. Round: (3 sc, 1 inc) * 3 (15) 7. Round: (4 sc, 1 inc) * 3 (18) 8. Round: (2 sc, 1 inc) * 6 (24) 9. Round: (3 sc, 1 inc) * 6 (30) 10. Round: (4 sc, 1 inc) * 6 (36) 11. Round: (5 sc, 1 inc) * 6 (42) 12. Round: (6 sc, 1 inc) * 6 (48) 13. Round: (7 sc, 1 inc) * 6 (54) 14. Round: (8 sc, 1 inc) * 6 (60) 15. Round: (9 sc, 1 inc) * 6 (66) 16. Round: (10 sc, 1 inc) * 6 (72) 17. Round: (11 sc, 1 inc) * 6 (78) (Increasing to 78 stitches so the lid fits comfortably over the body) 18–19. Rounds: 78 sc (78) Hat cuff (folded brim) in white yarn: 18. Round: BLO 78 sc (78) 21–26. Rounds (6 rounds): 78 sc (78) Assembly: Fold the white cuff upward/outward. Bend the tip of the hat slightly to the side and tack with a few stitches. Make a tight pom-pom about 4–5 cm in diameter from white yarn and sew it to the tip.
PART 3: Model 2 — Christmas Tree Box 1. Body Color and Decoration Crochet the entire body in dark green yarn. Ornaments (12–14 pieces): Using red, yellow, and white yarn; work 6 sc in MR and close with a sl st. Sew them diagonally spaced across the body. 2. Christmas Tree Lid (Layered) In dark green yarn: 1. Round: 6 sc in MR (6) 2. Round: (1 sc, 1 inc) * 3 (9) 3. Round: (2 sc, 1 inc) * 3 (12) 4. Round: (1 sc, 1 inc) * 6 (18) 5. Round: (2 sc, 1 inc) * 6 (24) 6. Round: BLO (3 sc, 1 inc) * 6 (30) (Leaving front loops free for the 1st ruffle layer) 7. Round: (4 sc, 1 inc) * 6 (36) 8. Round: (5 sc, 1 inc) * 6 (42) 9. Round: BLO (6 sc, 1 inc) * 6 (48) (Leaving front loops free for the 2nd ruffle layer) 10. Round: (7 sc, 1 inc) * 6 (54) 11. Round: (8 sc, 1 inc) * 6 (60) 12. Round: BLO (9 sc, 1 inc) * 6 (66) (Leaving front loops free for the 3rd ruffle layer) 13. Round: (10 sc, 1 inc) * 6 (72) 14. Round: (11 sc, 1 inc) * 6 (78) 15–16. Rounds: 78 sc (78) — On Round 17, for the bottom edge ruffle: (skip 1 st, 5 dc in next st, skip 1 st, 1 sl st) repeat around. Intermediate Branch Layers (on FLO stitches of Rounds 6, 9, and 12): Attach green yarn to the unworked front loops. On each layer, work (skip 1 st, 4 dc or 5 dc in 1 st, skip 1 st, 1 sl st) to create wavy pine boughs.
3. Top Star (2 Pieces Crocheted and Joined — Yellow Yarn) 1. Round: 5 sc in MR, join with sl st (5) 2. Round: 5 inc (10) 3. Round: (Ch 4; starting in 2nd ch from hook work 1 sl st, 1 sc, 1 hdc; skip 1 st on base, 1 sl st in next st) — Repeat this 5 times to form 5 star points. 4. Place the two stars with wrong sides together, sew around the edges with single crochet (adding a tiny bit of fiberfill inside), and sew to the top of the tree. 5. Sew mini red, yellow, and white ornaments between the layers of the lid. PART 4: Model 3 — Snowman Box 1. Body and Scarf Detail Crochet the entire body in white yarn. Buttons (3 pieces — Black Yarn): Work 6 sc in MR, Round 2: 6 inc (12), fasten off with sl st. Sew vertically down the front center of the body. Red Scarf: Ch 90 (long enough to wrap around the body). Starting in the 3rd ch from hook, work 88 hdc to the end of the row. Tie 3 red fringe strands onto each end. Wrap around the upper part of the body and sew so the ends hang down to the right of the buttons.
2. Snowman Head Lid (White Yarn) 1. Round: 6 sc in MR (6) 2. Round: 6 inc (12) 3. Round: (1 sc, 1 inc) * 6 (18) 4. Round: (2 sc, 1 inc) * 6 (24) 5. Round: (3 sc, 1 inc) * 6 (30) 6. Round: (4 sc, 1 inc) * 6 (36) 7. Round: (5 sc, 1 inc) * 6 (42) 8. Round: (6 sc, 1 inc) * 6 (48) 9. Round: (7 sc, 1 inc) * 6 (54) 10. Round: (8 sc, 1 inc) * 6 (60) 11. Round: (9 sc, 1 inc) * 6 (66) 12. Round: (10 sc, 1 inc) * 6 (72) 13. Round: (11 sc, 1 inc) * 6 (78) 14–18. Rounds (5 rounds): 78 sc (78) 14. Round: To create an inward-turned mouth/rim edge, work BLO 78 sc (78), then Round 20: (11 sc, 1 dec) * 6 (72) and fasten off. 3. Facial Features and Top Hat Carrot Nose (Orange Yarn): 4 sc in MR -> Round 2: 4 sc -> Round 3: (1 sc, 1 inc) * 2 (6) -> Round 4: 6 sc -> Round 5: (2 sc, 1 inc) * 2 (8) -> Round 6: 8 sc. Stuff lightly, curve slightly, and sew to the center of the face. Eyes and Mouth: Attach 8 mm black safety eyes on either side of the nose. Embroider a smiling mouth with black yarn. Make 2 cheeks using pink yarn with 6 sc in MR and sew them on. Top Hat (Black and Red Yarn): 1. Round: With black yarn, 6 sc in MR (6) 2. Round: 6 inc (12) 3. Round: (1 sc, 1 inc) * 6 (18) 4. Round: (2 sc, 1 inc) * 6 (24) 5. Round: BLO 24 sc (24) 6–8. Rounds: 24 sc (24) 6. Round: With red yarn, 24 sc (24) (Hat band) 7. Round: With black yarn, FLO (1 sc, 1 inc) * 12 (36) (Hat brim) 8. Round: (2 sc, 1 inc) * 12 (48), fasten off with sl st. Stuff lightly and sew slightly to the upper left of the head. Add a small green leaf and red berry/yarn accent beside it.
PART 5: Model 4 — Reindeer Box 1. Body and Holly Leaf Crochet the entire body in red yarn. Leaves (2 pieces — Green Yarn): Ch 9. Starting in 2nd ch from hook: 1 sc, 1 hdc, 2 dc, 1 hdc, 1 sc, then 3 sc in the last ch (turn). Work symmetrically along the other side: 1 sc, 1 hdc, 2 dc, 1 hdc, 1 sc. For leaf points, work (ch 2, sl st in same st) at 3 spots along each side to form pointed holly tips. Red Berries (3 pieces): 6 sc in MR, Round 2: 6 sc and fasten off. Sew the leaves angled left and right on the front center of the body, and attach the 3 red berries in the center between them. 2. Reindeer Head Lid (Cinnamon / Light Brown Yarn) Crochet Rounds 1–18 identically to the Snowman lid (increasing to 78 sc and working 5 straight rounds) in cinnamon brown yarn. (To keep the bottom edge from curling, work 1 round of sl st on Round 19 and fasten off).
3. Nose, Eyes, Ears, and Antlers White Muzzle (Oval): Ch 6. Starting in 2nd ch from hook: 1 inc, 3 sc, 4 sc in the last ch (turn), then 3 sc, 1 inc along the opposite side (14). On Round 2, make 2 increases at each corner to finish with (20). Sew onto the lower front center of the lid. Red Nose: 6 sc in MR -> Round 2: 6 inc (12) -> Round 3: 12 sc -> Round 4: 6 dec (6). Stuff lightly and sew right in the center of the white oval. Place the (8 mm) eyes just above and to either side of the muzzle. Ears (2 pieces): Inner ear (Tan/Cream): Ch 6 -> from 2nd ch: 1 sc, 1 hdc, 2 dc, 5 dc in last st, opposite side: 2 dc, 1 hdc, 1 sc. Outer ear (Cinnamon Brown): Crochet the same way. Layer the two pieces and join around the edge with single crochet using brown yarn. Antlers (2 pieces — Dark Brown Yarn): Main branch: 6 sc in MR -> Rounds 2–8: 6 sc (6). Side branch: 5 sc in MR -> Rounds 2–4: 5 sc (5). Sew the side branch onto Round 4 of the main branch. Sew the antlers onto the top of the lid, and sew the ears symmetrically just below and beside the antlers.
PART 6: Joining the Lid and Body (Hinge Technique) To keep the lids from tipping all the way back or getting misplaced when opened—just like in the photo—use a back-center hinge seam: 1. Center the lid on top of the body (make sure the facial features or belt buckle are aligned at the front center). 2. At the back center, sew 8–10 adjacent stitches along the bottom edge of the lid directly to 8–10 corresponding stitches along the upper rim of the body using matching yarn. 3. This stitched section acts as a hinge so the lid stays open at an angle as shown in the picture.